Precision CNC Milling Service
Precision CNC Milling Services
Leland CNC provides CNC milling services for custom components that require flat surfaces, pockets, slots, holes, threads, complex contours or tight feature relationships. CNC milling is suitable for aluminum housings, stainless steel brackets, plastic fixtures, instrument components, automation plates and parts that need accurate multi-face machining.
CNC Milling Capabilities
- 3-axis CNC milling for plates, brackets, housings and general precision parts.
- 4-axis and indexed machining for multiple-side features and reduced setups.
- 5-axis support for complex surfaces, angled holes and difficult-to-hold parts.
- Thread milling, tapping, reaming, counterbores, countersinks and precision pockets.
- Prototype milling and low-volume production with finishing and inspection support.
Materials for CNC Milled Parts
Common materials include aluminum 6061 and 7075, stainless steel 303, 304 and 316L, brass, copper, titanium and engineering plastics such as PEEK, PTFE, POM and Nylon. If you are unsure which material is best, we can compare machinability, cost, tolerance stability and surface finish options before production.
DFM Notes for Milled Parts
- Avoid unnecessarily deep narrow pockets when possible.
- Use internal corner radii instead of sharp inside corners.
- Separate cosmetic surface requirements from functional tolerance requirements.
- Call out threaded holes, inserts and inspection dimensions clearly on the drawing.
- Allow practical fixture areas when the part has features on many sides.
CNC Milling FAQ
When should I choose CNC milling?
Choose CNC milling when the part has flat faces, pockets, slots, holes, complex contours or multiple precision features that cannot be produced by turning alone.
Can you finish milled aluminum parts?
Yes. Common finishing options include anodizing, hard anodizing, bead blasting, polishing and chemical conversion coating, depending on the part function and cosmetic requirement.
Need CNC milled parts? Send your drawing and STEP file for quotation and DFM feedback.
